B1805

DTC B1805

CIRCUIT DESCRIPTION
The seat adjuster motors are controlled by the memory seat module through the adjuster motor control circuits. The memory seat module also monitors current flow through the adjuster motor control circuits. In an inactive state the control circuits are closed to ground within the memory seat module. In an active state the appropriate adjuster motor control circuit is switched to battery voltage within the memory seat module. The direction of the adjuster motor rotation is determined by which of the control circuits is switched to battery voltage while the other remains grounded.

CONDITIONS FOR RUNNING THE DTC
The system voltage must be between 9.0 and 16.0 volts.

CONDITIONS FOR SETTING THE DTC
The adjuster motor control circuit current monitored by the memory seat module is high, low, or open.

ACTION TAKEN WHEN THE DTC SETS
- The memory seat module will disable the seat adjuster motor for which a current status DTC is set.
- When the fault is no longer present a history status DTC will be stored, and adjuster motor operation will be restored.

CONDITIONS FOR CLEARING THE DTC
- The DTC will be current for as long as the fault is present.
- When the fault is no longer present the DTC will be a history status code.
- The history DTC will be cleared after 100 error free ignition cycles, or by using the scan tool clearing DTCs feature.

TEST DESCRIPTION

Steps 1-6:

Steps 7-9:

The numbers below refer to the step numbers on the diagnostic table.
2. Verify that the DTC is current or history by attempting to operate the seat adjuster motor for which the code is set.
3. Tests the adjuster motor control circuits for proper operation.