Actuator Replacement - Front Drive Axle
Actuator Replacement - Front Drive AxleRemoval Procedure
1. Raise the vehicle.
2. Remove the engine protection shield.
3. Disconnect the electrical connector from the actuator assembly.
4. Remove the actuator assembly bolts.
5. Remove the actuator assembly.
Installation Procedure
1. Install the actuator assembly.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the actuator assembly bolts.
^ Tighten the bolts to 6 Nm (53 inch lbs.).
3. Connect the electrical connector to the actuator assembly.
4. Install the engine protection shield.
5. Lower the vehicle.