Air Cleaner Outlet Resonator Replacement
AIR CLEANER OUTLET RESONATOR REPLACEMENTREMOVAL PROCEDURE
1. Loosen the air cleaner outlet duct and air cleaner outlet resonator clamps (2).
2. Disconnect the electrical connector from the intake air temperature (IAT) sensor (1).
3. Disconnect the air cleaner outlet duct from the air cleaner outlet resonator.
4. Disconnect the fuel pressure regulator vacuum supply from the air cleaner outlet resonator.
5. Remove the two air cleaner outlet resonator to engine bolts (4).
6. Disconnect the crankcase ventilation hose (1) from the valve cover port (2).
7. Remove the air cleaner outlet resonator assembly (5) from the engine.
INSTALLATION PROCEDURE
1. Install the air cleaner outlet resonator assembly (5) to the engine making sure of the following:
- The crankcase ventilation hose (1) is connected to the valve cover port (2).
- The air cleaner outlet resonator (5) is properly fit to the throttle body assembly.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the two air cleaner outlet resonator to engine bolts (4).
Tighten
Tighten the resonator to engine bolts to 6 N.m (53 lb in).
3. Connect the fuel pressure regulator vacuum supply to the air cleaner outlet resonator.
4. Connect the air cleaner outlet duct to the air cleaner outlet resonator.
5. Connect the electrical connector to the intake air temperature (IAT) sensor (1).
6. Properly position the air cleaner outlet duct and air cleaner outlet resonator clamps (2).
Tighten
Tighten the clamps (2) to 4 N.m (35 lb in).