68. Timing Chain Tensioner Installation

Timing Chain Tensioner Installation





1. Install the timing chain tensioner.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the timing chain tensioner bolts.
- Tighten the timing chain tensioner bolts to 25 Nm (18 lb ft).





3. Install the timing chain tensioner guide.
4. Install the timing chain tensioner guide bolts.
- Tighten the timing chain tensioner guide bolts to 14 Nm (124 lb in).





5. Install the timing chain tensioner shoe.
6. Install the timing chain tensioner shoe bolt.
- Tighten the timing chain tension shoe bolt to 25 Nm (18 lb ft).





7. Install the cylinder head access hole plugs.
- Tighten the cylinder head access hole plugs to 5 Nm (44 lb in).