27. Cylinder Head Removal - Right

Cylinder Head Removal Right





1. Remove the camshafts.
2. Remove the lifters.
3. Remove the water crossover pipe.
4. Remove the hex bolt (1).
5. Remove the cylinder head bolts in the proper order.
6. Remove the cylinder heads.
7. Clean the cylinder head mating surface.
8. Clean the cylinder block mating surface.
9. Clean the cylinder head bolt threads and bolts. Replace any stretched or damaged bolts.
10. Clean the cylinder block bolt holes of all debris, threadlocker, sealant etc. Installing a bolt to a blocked bolt hole will cause incorrect torque and may cause cylinder head/block damage.