Oil Pump: Service and Repair
Oil Pump ReplacementRemoval Procedure
1. Remove the front engine cover.
2. Remove the lower oil pan.
3. Remove the upper oil pan.
4. Loosen the 2 bolts (1) that secure the oil pump chain guide.
5. Remove the 3 bolts and the oil pump (1).
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the oil pump with the chain on the sprocket and secure with the 3 bolts verifying the long bolt (3) is in the proper location.
- Tighten the bolts to 27 Nm (19.5 ft. lbs.).
2. Push the center of the oil pump chain guide with a force of 0.5 - 0.6 N (0.11 - 0.13 lb.) and secure the guide with the 2 bolts (1).
- Tighten the 2 bolts to 11 Nm (7.5 ft. lbs.).
3. Install the front engine cover.
4. Install the upper oil pan.
5. Install the lower oil pan.