EGR Valve: Service and Repair

REMOVAL PROCEDURE




1. Remove the EGR valve electrical connector.
2. Remove both retaining bolts (3).
3. Remove the EGR valve (2).
4. Clean the remains of the EGR valve gasket (4) from intake manifold (1).

INSTALLATION PROCEDURE




1. Install the EGR valve gasket (4).
2. Install the EGR valve (2).
3. Install both retaining bolts (3).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the bolts to 25 N.m (18 lb ft).

4. Connect the EGR valve electrical connector.