Transfer Case Speed Sensor Replacement- Right Rear

Transfer Case Speed Sensor Replacement- Right Rear

Removal Procedure





1. Raise and suitably support the vehicle. Refer to Vehicle Lifting in Service Precautions.
2. Disconnect the right rear speed sensor electrical connector (3).





3. Remove the right rear speed sensor.

Installation Procedure





Notice: Refer to Fastener Notice in Service Precautions.

1. Install the right rear speed sensor.
^ Tighten the speed sensor to 15 Nm (11 ft. lbs.).





2. Connect the right rear speed sensor electrical connector (3).
3. Lower the vehicle.