Transfer Case Speed Sensor Replacement- Left Rear

Transfer Case Speed Sensor Replacement- Left Rear

Removal Procedure





1. Raise and suitably support the vehicle. Refer to Vehicle Lifting in Service Precautions.
2. Disconnect the left rear speed sensor electrical connector (4).





3. Remove the left rear speed sensor.

Installation Procedure





Notice: Refer to Fastener Notice in Service Precautions.

1. Install the left rear speed sensor.
^ Tighten the speed sensor to 15 Nm (11 ft. lbs.).





2. Connect the left rear speed sensor electrical connector (4).
3. Lower the vehicle.