95. Engine Front Cover Installation

Engine Front Cover Installation





1. Install the relief valve O-ring to the engine front cover.
2. Lubricate the O-ring with engine oil.





3. Apply a 2-3 mm wide and 0.5-1.5 mm high bead of P/N 97720043 sealant to the mating surfaces of the engine front cover.





4. Install the engine front cover.

5. Notice:
Refer to Fastener Notice in Service Precautions.

Install the engine front cover bolts.
^ Tighten the engine front cover bolts to 21 Nm (15 ft. lbs.).





6. Install a new O-ring to the crankshaft position sensor spacer.
7. Lubricate the O-ring with engine oil.
8. Install the crankshaft position sensor spacer.
9. Install the crankshaft position sensor spacer bolts.
^ Tighten the crankshaft position sensor spacer bolts to 10 Nm (89 inch lbs.).
10. Install a new O-ring to the crankshaft position sensor.
11. Lubricate the O-ring with engine oil.
12. Install the crankshaft position sensor.
13. Install the crankshaft position sensor bolt.
^ Tighten the crankshaft position sensor bolt to 10 Nm (89 inch lbs.).