127. Cooling Fan Pulley Installation

Cooling Fan Pulley Installation





1. Lubricate the camshaft position sensor O-ring with engine oil.
2. Install the camshaft position sensor.

3. Notice:
Refer to Fastener Notice in Service Precautions.

Install the camshaft position sensor retaining bolt.
^ Tighten the camshaft position sensor retaining bolt to 10 Nm (89 inch lbs.).





4. Install the cooling fan pulley.
5. Install the cooling fan pulley bolts and nuts.
^ Tighten the cooling fan pulley bolts and nuts to 41 Nm (30 ft. lbs.).
6. Connect the camshaft position sensor connector.