110. Valve Rocker Arm Cover Installation - Upper Left

Valve Rocker Arm Cover Installation - Upper Left





1. Apply a 2-3 mm wide by 0.5-1.5 mm high bead of P/N 97720043 sealant to the mating surface of the upper valve rocker arm cover.





2. Install the upper valve rocker arm cover.






3. Notice:
Refer to Fastener Notice in Service Precautions.

Install the upper valve rocker arm cover screws.
^ Tighten the upper valve rocker arm cover screws to 8 Nm (71 inch lbs.).