88. Engine Flywheel Installation - Manual Trans

Engine Flywheel Installation (Manual Transmission)





1. Install the engine flywheel.

2. Notice: Refer to Fastener Notice in Service Precautions.

Install the engine flywheel bolts.Tighten the fasteners following a criss cross pattern.
^ Tighten the engine flywheel bolts a first pass to 40 Nm (30 lb ft).
^ Tighten the engine flywheel bolts a second pass to 80 Nm (59 lb ft).
^ Tighten the engine flywheel bolts a final pass to 100 Nm (74 lb ft).