Procedures
HEATED SEAT SWITCH REPLACEMENT - FRONTREMOVAL PROCEDURE
1. Remove the seat cushion outer trim panel from the seat assembly.
2. Remove the seat switch bezel.
3. Release the tabs (1) that retain the heated seat switch (2) to the seat switch bezel (3).
4. Disconnect the electrical connector on the heated seat switch harness from the seat wiring harness.
5. Remove the heated seat switch from the seat switch bezel assembly.
INSTALLATION PROCEDURE
1. Connect the electrical connector on the heated seat switch harness to the seat wiring harness.
2. Install the heated seat switch (2) to the seat switch bezel (3) by snapping the switch assembly into the bezel. Verify that the retaining tabs (1) are fully seated.
3. Install the seat switch bezel.
4. Install the seat cushion outer trim panel to the seat assembly.