Seat Switch Bezel Replacement

SEAT SWITCH BEZEL REPLACEMENT

REMOVAL PROCEDURE
1. Remove the seat from the vehicle.
2. Remove the seat cushion outer trim panel from the seat assembly.




3. Remove the 3 screws that retain the switch bezel to the seat.
4. Remove the seat switch from the switch bezel by releasing the retaining tabs.
5. Remove the heated seat switch from the switch bezel by releasing the retaining tabs.
6. Remove the switch bezel from the seat.

INSTALLATION PROCEDURE
1. Install the heated seat switch to the switch bezel, verifying that the retaining tabs are fully seated.
2. Install the seat switch to the switch bezel, verifying that the retaining tabs are fully seated.




3. Install the switch bezel to the seat with the 3 screws.

NOTE: Refer to Fastener Note in Service Precautions.

Tighten
Tighten the seat switch bezel screws to 1.5 N.m (13 lb in).

4. Install the seat cushion outer trim panel to the seat assembly.
5. Install the seat in the vehicle.