Air Flow Meter/Sensor: Service and Repair

MASS AIR FLOW (MAF)/INTAKE AIR TEMPERATURE (IAT) SENSOR REPLACEMENT

REMOVAL PROCEDURE
1. Open the hood.
2. Disconnect the electrical connection from mass air flow (MAF)/intake air temperature (IAT) sensor.
3. Remove air cleaner outlet duct.




4. Loosen clamp (2) retaining MAF/IAT to upper air box.
5. Remove MAF/IAT (1) sensor from vehicle.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Service Precautions.




1. Install the MAF/IAT (1) sensor to upper air box.

Tighten
Tighten clamp (2) to 4 N.m (35 lb in).

2. Install the air cleaner outlet duct.
3. Connect the electrical connector to MAF/IAT sensor.
4. Close the hood.