Seat Switch Replacement - Power

SEAT SWITCH REPLACEMENT - POWER

REMOVAL PROCEDURE
1. Remove the seat cushion outer trim panel from the seat assembly.
2. Remove the seat switch bezel.




3. Release the tabs that retain the seat switch (4) to the seat switch bezel (3).
4. Disconnect the electrical connector on the seat switch harness from the seat wiring harness.
5. Remove the seat switch from the seat switch bezel assembly.

INSTALLATION PROCEDURE
1. Connect the electrical connector on the seat switch harness to the seat wiring harness.




2. Install the seat switch (4) to the seat switch bezel (3) by snapping the switch assembly into the bezel. Verify that the retaining tabs are fully seated.
3. Install the seat switch bezel.
4. Install the seat cushion outer trim panel to the seat assembly.