Folding Top Strikers Replacement - Rear Upper
FOLDING TOP STRIKERS REPLACEMENT - REAR UPPERREMOVAL PROCEDURE
1. Cycle the folding top open 100 mm (4 in).
2. Stop the folding top at this point.
3. Remove the front headliner.
4. Using a grease pencil or suitable marking device, mark the location of the folding top rear upper strikers to the folding top rear panel.
5. Remove the folding top rear upper striker fasteners.
6. Remove the folding top rear upper striker from the vehicle.
INSTALLATION PROCEDURE
1. Install the folding top rear upper striker to the vehicle.
2. Install the folding top rear upper striker fasteners. Hand tighten only.
3. Align the folding top rear upper striker to the alignment marks.
NOTE: Refer to Fastener Note in Service Precautions.
Tighten
Tighten the folding top rear upper striker fasteners to 10 N.m (88 lb in).
4. Install the front headliner.
5. Inspect the folding top for proper orientation.
6. Cycle the folding top closed.