Generator Bracket Replacement
GENERATOR BRACKET REPLACEMENTREMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the engine cooling fan.
3. Remove the drive belt.
4. Remove the generator.
5. Remove the engine wiring harness bracket from the generator mounting bracket.
6. Remove the drive belt tensioner.
7. Remove the drive belt idler pulley.
8. Remove the 3 bolts and nut holding the generator mounting bracket to the engine.
9. Remove the generator mounting bracket.
INSTALLATION PROCEDURE
1. Install the generator mounting bracket to the cylinder head.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the 2 generator mounting bracket bolts and the nut.
Tighten
Tighten the generator mounting bracket bolts and nut to 41 N.m (30 lb ft).
3. Install the drive belt idler pulley.
4. Install the drive belt tensioner.
5. Install the engine wiring harness bracket to the generator mounting bracket.
Tighten
Tighten the engine wiring harness bracket bolt to 25 N.m (18 lb ft).
6. Install the generator.
7. Install the drive belt.
8. Install the engine cooling fan.
9. Connect the negative battery cable.