Air Bag Deactivation Switch: Service and Repair

INFLATABLE RESTRAINT I/P MODULE DISABLE SWITCH REPLACEMENT

REMOVAL PROCEDURE




1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3.

CAUTION: Refer to SIR Caution in Service Precautions.

2. Remove trim plate - I/P accessory panel.
3. Release the 4 locking tabs (1) on the passenger AIR BAG disable switch.




4. Remove the switch from the instrument panel.
5. Disconnect the electrical connections, as needed.

INSTALLATION PROCEDURE




1. Connect the electrical connections, as needed.
2. Install the switch to the instrument panel by firmly pressing the switch into place.
3. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3.