Head Restraint Retractor Assembly Replacement - Rear Seat

Head Restraint Retractor Assembly Replacement - Rear Seat

Removal Procedure

Caution: Refer to Prevent Accidental Deployment of the Head Restraint Retractor Assembly in Service Precautions.

1. Remove the rear seat head restraint.
2. Remove the rear seat back release latch.
3. Remove the seat back cover and pad.




4. Remove the 2 bolts (2) that retain the head restraint retractor assembly (1) to the seat back frame.




5. Remove the 2 bolts (1) that retain the head restraint retractor assembly (2) to the seat back frame.




6. Remove the release cable (3) from the stud (1) on the head restraint retractor assembly.
7. Remove the release cable (2) from the slot in the head restraint retractor assembly.
8. Remove the retractor assembly from the seat back frame.


Installation Procedure

1. Position the head restraint retractor assembly to the seat back.




2. Install the release cable (2) by sliding the cable into the slot in the head restraint retractor assembly.





Notice: Refer to Fastener Notice in Service Precautions.

3. Install the 2 bolts (1) that retain the rear head restraint retractor assembly (2) to the seat back frame.

Tighten the rear head restraint retractor bolts to 7 N.m (61 lb in).





4. Install the 2 bolts (2) that retain the rear head restraint retractor assembly (1) to the seat back frame.

Tighten the rear head restraint retractor bolts to 7 N.m (61 lb in).

5. Install the seat back cover and pad.
6. Install the rear seat back release latch.
7. Install the rear seat head restraint.