Front Door Latch: Service and Repair

Latch Replacement - Front Door

Removal Procedure

1. Raise the window to the closed position.
2. Remove the door trim panel.
3. Remove the water deflector.




4. Remove the inside door lock rod (1) from the latch assembly.
5. Remove the inside door handle rod (2) from the latch assembly.




6. Remove the outside door lock rod (1) from the latch assembly.
7. Remove the outside door handle rod (2) from the latch assembly.
8. Disconnect the power actuator wiring connector, if equipped.
9. Remove the fasteners that retain the latch assembly to the door.
10. Remove the latch assembly from the door.
11. Remove the lock actuator from the latch.

Installation Procedure

1. Install the lock actuator to the latch.
2. Install the latch assembly to the door.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the fasteners that retain the latch assembly to the door.

Tighten the fasteners to 9 N.m (80 lb in).

4. Connect the power actuator wiring connector, if equipped.




5. Install the outside door handle rod (2) to the latch assembly.
6. Install the outside lock rod (1) to the latch assembly.




7. Install the inside door handle rod (2) to the latch assembly.
8. Install the inside door lock rod to the latch assembly (1).
9. Install the water deflector.
10. Install the door trim panel.