V7 - Direct Mount

CLUTCH ROTOR AND/OR BEARING REMOVAL (V7 - DIRECT MOUNT)

TOOLS REQUIRED
- J 33023-A Puller Pilot
- J 41552 Compressor Pulley Puller
- J 41790 Compressor Holding Fixture







1. Remove the A/C compressor from the vehicle.
2. Clamp J 41790 in a vise and attach the A/C compressor to J 41790.







3. Remove the clutch plate and hub assembly.
4. Using external snap ring pliers (1), remove the retaining ring (3) from the clutch rotor and bearing assembly.







5. Place J 33023-A on the clutch rotor.







6. Install J 41552 down into the inner circle of slots in the rotor. Turn J 41552 clockwise in the slots to engage the puller tangs with the rotor.
7. Hold J 41552 in place and use a wrench to turn the center forcing screw against J 33023-A to remove the clutch rotor and bearing assembly.