Air Cleaner Fresh Air Duct/Hose: Service and Repair
FILLER TUBE REPLACEMENTREMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Relieve the fuel system pressure.
3. Raise the vehicle.
4. Wipe the vent hose connection at the fuel tank and then disconnect the vent hose and clamp (1).
5. Wipe the fuel filler hose connection at the fuel tank and then disconnect the fuel filler hose and clamp (2).
6. Remove the filler pipe ground strap bolt (4).
7. Remove the fuel fill pipe to fill pipe housing attaching screws.
8. Remove the fuel fill and vent pipes and hoses.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the fuel fill and vent pipes and hoses to the fuel tank and the fill pipe housing.
Tighten
- Tighten the vent hose clamp (1) to 1.7 N.m (15 lb in).
- Tighten the fuel fill hose clamp (2) to 2.5 N.m (22 lb in).
1. Connect the fill pipe ground strap to the frame with the bolt (4) and washer (3).
Tighten
Tighten the ground strap bolt to 15 N.m (11 lb ft).
2. Lower the vehicle.
3. Install the fuel fill pipe to fill pipe housing attaching screws.
Tighten
Tighten the fuel fill pipe to fill pipe housing screws to 1.9 N.m (17 lb in).
4. Install the fuel filler cap.
5. Connect the negative battery cable.
6. Inspect for leaks.