Luggage Carrier Rivnut Replacement

Luggage Carrier Rivnut Replacement

Removal Procedure

1. Remove the luggage carrier.






Caution: Refer to Safety Glasses Caution in Service Precautions.

2. Drill through the luggage carrier rivnut head using a 7.5 mm (0.295 in) drill bit.
3. Remove the rivnut from the roof.


Installation Procedure

1. Use a 10 mm (0.39 in) drill bit to drill the hole in the roof out.




2. Install a replacement rivnut to the hole in roof using a rivnut tool, or equivalent.
3. Install the luggage carrier.