4. Clutch Pilot Bearing Removal
Clutch Pilot Bearing RemovalTools Required
* J43276 Clutch Pilot Bearing Remover
Notice: When using the J43276 Clutch Pilot Bearing Remover always secure the J43276-1 Clutch Pilot Bearing Remover tool body using a wrench. Do not allow the J43276-1 tool body to rotate. Failing to do so will cause damage to the J43276-1 tool body.
Important: The flywheel spacer, if applicable, must be removed prior to clutch pilot bearing removal.
1. Remove the clutch pilot bearing using the J43276.
1.1. Install the J43276-1 into the clutch pilot bearing.
1.2. Using a wrench, secure the J43276-1.
1.3. Insert the J43276-2 into the J43276-1.
1.4. Rotate the J43276-2 clockwise into the J43276-1 until the clutch pilot bearing is completely removed from the crankshaft.
1.5. Rotate the J43276-2 counterclockwise to remove the J43276-2 from the J43276-1.
1.6. Remove the J43276-1 from the tool body.
2. Discard the pilot bearing.