Sun Visor: Service and Repair
SUNSHADE REPLACEMENTREMOVAL PROCEDURE
1. Remove the screws that retain the sunshade to the roof.
2. Disconnect the electrical connections, if equipped.
3. Remove the screw that retains the sunshade retainer to the roof.
4. Remove the sunshade from the vehicle.
INSTALLATION PROCEDURE
1. Install the sunshade to the roof.
2. Install the sunshade retainer and the sunshade retainer screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the screws to 1.1 N.m (10 lb in).
3. Connect the electrical connections, if equipped.
4. Install the screws that retains the sunshade to the roof.
Tighten
Tighten the screws to 1.1 N.m (10 lb in).