83. Engine Flywheel Installation

Engine Flywheel Installation

Important: Make sure the flywheel is installed correctly. Engine Side is stamped on the flywheel to assist with installation.

1. Install the engine flywheel.

Notice: Refer to Fastener Notice in Service Precautions.
Fastener Notice







2. Install the engine flywheel bolts. Tighten the fasteners following a criss cross pattern.
- Tighten the engine flywheel bolts to 40 Nm (30 lb ft) for the first pass.
- Tighten the engine flywheel bolts to 80 Nm (59 lb ft) for the second pass.
- Tighten the engine flywheel bolts to 100 Nm (74 lb ft) for the final pass.