Carpet Replacement - Front

Carpet Replacement - Front

Removal Procedure

1. Disable the SIR. Refer to Disabling the SIR System In SIR.
2. Remove the front bucket seats.
3. Remove the front door sill plates.
4. Remove the center pillar trim panels.
5. Remove the floor console.
6. Remove the floor console bracket.




7. Remove the carpet from the vehicle.

Installation Procedure




1. Position the carpet to the floor panel.
2. Feed the front edge of the carpet underneath the instrument panel.
3. Align the holes in the carpet to the seat studs on the floor panel.
4. Position the rear carpet over the edge of the front carpet.
5. Install the floor console bracket.
6. Install the floor console.
7. Install the center pillar trim panels.
8. Install the front door sill plates.
9. Install the front bucket seats.
10. Enable the SIR. Link. Refer to Disabling the SIR System In SIR.