Headlamp Relay: Service and Repair
HEADLAMP DRIVER MODULE (HDM) RELAY REPLACEMENTTOOLS REQUIRED
J 43244 Relay Puller Pliers
REMOVAL PROCEDURE
1. Open and support the hood.
2. Remove the protective covers from the underhood fuse block.
3. Use the J 43244 in order to remove the headlamp driver module (1) from the underhood fuse block.
INSTALLATION PROCEDURE
1. Use the J 43244 in order to install the headlamp driver module (1) to the underhood fuse block.
2. Install the protective covers to the underhood fuse block.
3. Close the hood.