Fog Lamp Relay Replacement (RPO T96)

TOOLS REQUIRED
J 43244 Relay Puller Pliers

REMOVAL PROCEDURE




1. Open and support the hood.
2. Remove the protective covers from the underhood junction block.
3. Use the J 43244 in order to remove the fog lamp relay (1) from the underhood junction block.

INSTALLATION PROCEDURE




1. Use the J 43244 in order to install the fog lamp relay (1) to the underhood junction block.
2. Install the protective covers to the underhood junction block.
3. Close the hood.

For a description of the RPO Code(s) shown in this article/images refer to the RPO Code List found at Vehicle/Application ID. RPO Codes