Molding Replacement - Rear Side Door Lower (LT Models)

Molding Replacement - Rear Side Door Lower (LT Models)

Removal Procedure





1. Use a taped flat bladed tool or a taped trim tool in order to release the 7 plastic retainers that retain the rear side door lower molding (3). Release the rear side door lower molding beginning at the bottom of the molding.
2. Remove the rear door lower molding (3) from the vehicle.
3. Remove the 7 plastic retainers from the rear door and/or the door lower molding (3).



Installation Procedure





1. Install the 7 plastic retainers to the rear side door lower molding (3). Replace any retainers that were damaged in the removal process.
2. Install the rear side door lower molding (3) to the rear door. Make certain that the plastic retainers are completely engaged.