Connecting Rod: Specifications

Connecting Rod Bearing Cap Nuts 35 Nm (26 ft. lbs.)

Connecting Rod Side Clearance Standard 0.10-0.21 mm (0.0039-0.0078 inch)
Maximum Limit 0.35 mm (0.0137 inch)
Connecting Rod Bow Limit 0.050 mm (0.0020 inch)
Connecting Rod Twist Limit 0.10 mm (0.0039 inch)
Standard Crankshaft Connecting Rod Diameter 43.982- 44.000 mm
(1.7316-1.7322 inch)
Undersize Crankshaft Connecting Rod Diameter 0.25 mm (0.0098")
43.732-43.750 mm (1.7218-1.7224 inch)
Maximum Crankshaft Diameter Out-of-Round and Taper 0.01 mm
(0.0004 inch)
Connecting Rod Small End Inside Diameter 19.003-19.011 mm
(0.7481-0.7485 inch)