Compressor Clutch Coil Install (V7 - Direct Mount)

TOOLS REQUIRED
^ J 8433 A/C Compressor Pulley Puller J 8433-3 Forcing Screw
^ J 33024 Clutch Coil Installer Adaptor
^ J 33025 Clutch Coil Puller Legs
^ J 41790 A/C Compressor Holding Fixture
^ J 42136 A/C Lip Seal Remover




1. Place the clutch coil assembly (1) on the front head with the clutch coil terminal positioned at the mark made during disassembly.
2. Place the J 33024 over the internal opening of the clutch coil housing and align installer with the A/C compressor front head.
3. Install the J 8433-3 into the J 8433 and center the screw in the countersunk center hole of the J 33024.
4. Install the 4 inch through bolts and washers from the J 42136 tool kit into the J 33025 and attach them to the A/C compressor mounting bosses.
5. Turn the center forcing screw of the J 8433 to press the clutch coil onto the front head until the clutch coil is fully seated.
Make sure the clutch coil and the J 33024 stay in-line with each other while pressing the clutch coil onto the A/C compressor.
6. Install the A/C compressor clutch rotor and bearing assembly.
7. Install the A/C compressor clutch plate and hub assembly.
8. Remove the A/C compressor from the J 41790.
9. Install the A/C compressor into the vehicle.