Rear Seat Heater Switch Replacement

Rear Seat Heater Switch Replacement

Removal Procedure

1. Remove the center console end panel. Refer to Center Console End Panel Replacement (Center Console End Panel Replacement) in Instrument Panel, Gages, and Console.




2. Disconnect the electrical connector.
3. Remove the seat heater switch retaining screws.
4. Remove the switch from the vehicle.

Installation Procedure




1. Install the switch to the console panel.

Notice: Refer to Fastener Notice (Fastener Notice) in Cautions and Notices.

2. Install the retaining screw.

Tighten the screws to 1.6 Nm (14 lb in).

3. Connect the electrical connector.
4. Install the center console end panel. Refer to Center Console End Panel Replacement (Center Console End Panel Replacement) in Instrument Panel, Gages, and Console.