Removal and Replacement

Power Seat Switch Replacement

Removal Procedure

1. Remove the lumbar knob, if equipped. Refer to Lumbar Support Knob Replacement (Lumbar Support Knob Replacement).




2. Remove the power seat switch bezel from the seat. Refer to Driver or Passenger Seat Adjuster Switch Bezel Replacement (Service and Repair).




3. Remove the power seat switch to bezel screws.
4. Remove the power seat switch.

Installation Procedure

Notice: Refer to Fastener Notice (Fastener Notice) in Cautions and Notices.




1. Install the power seat switch to bezel screws.

Tighten the screws to 2 Nm (18 lb in).




2. Install the power seat switch bezel to the seat. Refer to Driver or Passenger Seat Adjuster Switch Bezel Replacement (Service and Repair).
3. Install the lumbar knob, if equipped. Refer to Lumbar Support Knob Replacement (Lumbar Support Knob Replacement).