82. Engine Flywheel Installation

Engine Flywheel Installation (C/K/G/C350OHD with AT)





Important: Make sure the flywheel is installed correctly. Engine Side is stamped on the flywheel to assist with installation.

1. Install the engine flywheel. Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the engine flywheel bolts. Tighten
- Tighten the engine flywheel bolts to 40 Nm (30 lb ft) for the first pass.
- Tighten the engine flywheel bolts to 80 Nm (59 lb ft) for the second pass.
- Tighten the engine flywheel bolts to 100 Nm (74 lb ft) for the final pass.