Fuel Tank Balance Module Replacement

Fuel Tank Balance Module Replacement

Removal Procedure




1. Remove the component box lid.




2. Disconnect the fuel tank balance module electrical connector (2).




3. Remove the fuel tank balance module mounting nuts and washers.
4. Remove the fuel tank balance module.

Installation Procedure





Notice: Refer to Fastener Notice in Cautions and Notices.

1. Install the fuel tank balance module, washers, and nuts.

Tighten the nuts to 7 Nm (62 lb in).




2. Connect the fuel tank balance module electrical connector (2).




3. Install the component box lid.

Tighten the bolts to 30 Nm (22 lb ft).