Door Window Weatherstrip

Front Side Door Window Weatherstrip Replacement

Removal Procedure

1. Remove the door trim panel. Refer to Front Side Door Trim Panel Replacement Service and Repair.
2. Remove the water deflector Refer to Front Side Door Water Deflector Replacement Service and Repair.
3. Remove the window. Refer to Front Side Door Window Replacement (Service and Repair).




4. Remove the screws.
5. Pull the weatherstrip from the following locations:

* The front of the glass run channel
* The top of the window frame flange
* The rear of the glass run channel

6. Remove the weatherstrip from the door.

Installation Procedure




1. Install the weatherstrip to the following locations:

* The front of the glass run channel
* The top of the window frame flange
* The rear of the glass run channel

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the bolts.

Tighten to 6 Nm (53 lb in).

3. Install the window. Refer to Front Side Door Window Replacement (Service and Repair).
4. Install the water deflector. Refer to Front Side Door Water Deflector Replacement Service and Repair.
5. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement Service and Repair.
6. Inspect operation of window.