Hazard Warning Switch: Service and Repair

EMERGENCY ROOF LAMP SWITCH REPLACEMENT

REMOVAL PROCEDURE




1. Remove the knee bolster.




2. Disconnect the electrical connector (4).
3. Remove the retainer (3) from the rear of the faceplate.
4. Remove the switch from the faceplate.

INSTALLATION PROCEDURE




1. Install the switch to the faceplate.
2. Install the retainer (3).
2.1. Align the indexing tab on the nut to the tab on the switch (1).
2.2. Slide the nut to the faceplate until the nut snaps into position.
3. Connect the electrical connector (4).




4. Install the knee bolster.