Luggage Carrier Replacement (All Except Z-71)

REMOVAL PROCEDURE




1. Remove the rear pad covers.
2. Remove the cross rails by releasing the lever on both sides and sliding toward rear of vehicle.
3. Remove the side rail attaching bolts.
4. Remove the side rail(s).

INSTALLATION PROCEDURE




1. Install the side rail(s).

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the side rail attaching bolts.

Tighten
Tighten the bolts 4 N.m (35 lb in).

3. Install the cross rails by sliding toward front of vehicle and engaging lever on both sides.
4. Install the rear pad covers by snapping into place.

"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID". RPO Codes