End Gate - Handle Binds

File In Section: 08 - Body and Accessories

Bulletin No.: 01-08-66-015

Date: December, 2001

TECHNICAL

Subject:
End Gate Handle Binds (Replace Handle)

Models:
2002 Chevrolet Avalanche Built Prior to June 1, 2001

Condition

Some customers may comment that the end gate handle binds when opening.

Correction

Important:
Handle replacement requires that the upper molding (Spoiler) be removed. Engineering has determined that this molding be replaced if removed. When ordering the handle also order the molding listed below.

Replace the rear handle. Refer to the Handle Replacement - End Gate procedure in the Body Rear End sub-section of the Service Manual for end gate handle replacement (SI 2000 Document ID # 827396).





Parts Information

Parts are currently available from GMSPO.

Warranty Information





For vehicles repaired under warranty, use the table shown.





DISCLAIMER