Trim Panel Replacement - Cowl Side

Trim Panel Replacement - Cowl Side

Removal Procedure

1. Remove the driver's or the passenger's knee bolster. Refer to Knee Bolster Replacement - Left (Knee Bolster Replacement - Left) orKnee Bolster Replacement - Right (Knee Bolster Replacement - Right) in Instrument Panel, Gages and Console.




2. Remove the screws that retain the panel to the cowl side.
3. Remove the trim panel from the vehicle.



Installation Procedure

1. Install the trim panel to the vehicle.





Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the screws that retain the trim panel to the cowl side.

Tighten the screws that retain the trim panel to the cowl side to 2 N.m (18 lb in).

3. Install the driver's or the passenger's knee bolster. Refer to Knee Bolster Replacement - Left (Knee Bolster Replacement - Left) orKnee Bolster Replacement - Right (Knee Bolster Replacement - Right) in Instrument Panel, Gages and Console.