Valve Rocker Arm Cover Replacement (Left)
Valve Rocker Arm Cover Replacement - LeftRemoval Procedure
1. Remove the engine cover.
2. Remove the oil filler tube and bolt
3. Disconnect the Engine Coolant Temperature (ECT) sensor electrical connector.
4. Remove the PCV valve hose assembly from the intake manifold and the valve rocker arm cover.
5. Remove the rear spark plug wire retainer from the support.
6. Remove the valve rocker arm cover.
7. Clean all sealing surfaces and the valve rocker arm cover.
Installation Procedure
1. Install the valve rocker arm cover and bolts.
2. Install the PCV valve hose assembly to the intake manifold and in the valve rocker arm cover.
3. Install the rear spark plug wire retainer to the support
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the oil filler tube and bolt.
Tighten the bolt to 25 Nm (18 ft. lbs.).
5. Connect the ECT sensor electrical connector.
6. Install the engine cover.