Radiator: Service and Repair
Radiator ReplacementRemoval Procedure
1. Drain the coolant from the radiator.
2. Remove the upper fan shroud.
3. Remove the lower fan shroud.
4. Disconnect the radiator hoses from the radiator.
5. Disconnect the transmission oil cooler lines from the radiator.
6. Disconnect the engine oil cooler lines from the radiator.
7. Disconnect the coolant recovery reservoir hose from the radiator filler neck.
8. Remove the radiator grille.
9. Remove the four bolts attaching the A/C condenser to the radiator.
10. Remove the radiator.
Installation Procedure
1. Install the radiator.
2. Install the four bolts attaching the A/C condenser to the radiator.
3. Install the radiator grille.
4. Connect the coolant recovery reservoir hose to the radiator filler neck.
5. Connect the engine oil cooler lines to the connector fittings.
6. Connect the transmission oil cooler lines into the connector fittings.
7. Connect the radiator inlet hose and the outlet hose to the radiator.
8. Install the lower fan shroud.
9. Install the upper fan shroud.
10. Refill the cooling system with coolant.