Mat/Carpet Replacement - Rear Floor (B31)

Mat/Carpet Replacement - Rear Floor (B31)

Removal Procedure

1. Unsnap the seat belts from the second seat belt latches.
2. Remove the seats and the risers from the vehicle. Refer to Seat Replacement - Rear Bench (Seat Replacement - Rear Bench) in Seats.
3. Remove the engine cover. Refer to Engine Cover Replacement (Engine Cover Replacement) .
4. Remove the trim plates from the following:

* The front
* The rear side
* The rear
Refer to Carpet Retainer Replacement (Carpet Retainer Replacement) .

5. Remove the cowl side panel trim. Refer to Trim Panel Replacement - Cowl Side (Trim Panel Replacement - Cowl Side) .
6. Remove the right front side door lock pillar garnish molding. Refer to Garnish Molding Replacement - RF Lock Pillar (Garnish Molding Replacement - RF Lock Pillar) .
7. Remove the body side front lower trim panel. Refer to Trim Panel Replacement - Body Side Front Lower (Trim Panel Replacement - Body Side Front Lower) .
8. Remove the left body side trim panel. Refer to Trim Panel Replacement - Left Body Side (Trim Panel Replacement - Left Body Side) .
9. Remove the right body side trim panel. Refer to Trim Panel Replacement - Right Body Side (Trim Panel Replacement - Right Body Side) .
10. Remove the bolt that retains each cargo net anchor to the floor of the vehicle, if equipped.
11. The carpet bezels are retained by sonic weld and are not to be removed from the carpet.




12. Remove the carpet from the vehicle.



Installation Procedure





1. Install the carpet into the vehicle.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the bolt that retains each cargo net anchor to the floor of the vehicle, if equipped.

Tighten the bolt that retains each cargo net anchor to the floor 2 N.m (18 lb in).

3. Install the right body side trim panel. Refer to Trim Panel Replacement - Right Body Side (Trim Panel Replacement - Right Body Side) .
4. Install the left body side trim panel. Refer to Trim Panel Replacement - Left Body Side (Trim Panel Replacement - Left Body Side) .
5. Install the body side front lower trim panel. Refer to Trim Panel Replacement - Body Side Front Lower (Trim Panel Replacement - Body Side Front Lower) .
6. Install the cowl side panel trim. Refer to Trim Panel Replacement - Cowl Side (Trim Panel Replacement - Cowl Side) .
7. Install the right front side door lock pillar garnish molding. Refer to Garnish Molding Replacement - RF Lock Pillar (Garnish Molding Replacement - RF Lock Pillar) .
8. Install the trim plates at the following doors:

* The front
* The rear side
* The rear
Refer to Carpet Retainer Replacement (Carpet Retainer Replacement) .

9. Install the engine cover. Refer to Engine Cover Replacement (Engine Cover Replacement) .
10. Install the seats and the risers. Refer to Seat Replacement - Rear Bench (Seat Replacement - Rear Bench) in Seats.
11. Snap the seat belts to the second seat belt latches.