High Beam System Operation

The high-beam headlamp operation is controlled using the turn signal/headlamp switch lever on the steering column. In order to change headlamp operation from low-beam to high-beam, push the switch lever toward the instrument panel (until the detent is felt) and release. With the switch lever in the high position, the high beam filaments in the headlamps ground through the dimmer switch, through the closed contacts of the headlamp relay to G200. The high beam filaments will light when the ground is supplied. The high-beam indicator (blue) in the instrument cluster will light during high-beam headlamp operation. The ground path for the high beam indicator is the same as the high beam filaments. In order to change headlamp operation back to low-beam operation, pull the turn signal switch lever toward the driver (until the detent is felt) and release.