Turn Signal & Multifunction Switch - Disassemble

Disassembly Procedure
1. Remove the upper and lower shrouds. Refer to Steering Column Trim Covers - Disassemble -Off Vehicle.





2. Remove the wire harness assembly (4) from the wire harness strap (5).
3. Remove the wire harness straps (3) from the wire harness assembly (4).
4. Remove 1 wire harness strap (2) from the upper tilt head assembly (1).





5. Slide the 2 connectors of the turn signal and multifunction switch assembly (2) off of the bulk head connector (1).





6. Remove the the 2 pan head tapping screws.





7. Remove the turn signal and multifunction switch assembly.