Electronic Column Lock Module

Removal Procedure

Caution: Refer to SIR Handling Caution in Service Precautions.

1. Disable the SIR system. Refer to Disabling the SIR System in Air Bags and Seat Belts.
2. Remove the tilt lever. Refer to Tilt Lever Replacement - On Vehicle.
3. Remove the steering wheel. Refer to Steering Wheel Replacement.
4. Remove the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement - On Vehicle (Cylinder Rotates) or Ignition Lock Cylinder Replacement - On Vehicle (Unable to Rotate Cylinder).
5. Remove the steering column trim covers. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle.
6. Remove the lock module assembly. Refer to Electronic Column Lock Module - Disassemble - Off Vehicle.


Installation Procedure
1. Install the lock module assembly. Refer to Electronic Column Lock Module - Assemble - Off Vehicle.
2. Install the steering column trim covers. Refer to Steering Column Trim Covers - Assemble - Off Vehicle.
3. Install the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement - On Vehicle (Cylinder Rotates) or Ignition Lock Cylinder Replacement - On Vehicle (Unable to Rotate Cylinder).
4. Install the steering wheel. Refer to Steering Wheel Replacement.
5. Install the tilt lever. Refer to Tilt Lever Replacement - On Vehicle.
6. Enable the SIR system. Refer to Enabling the SIR System in Air Bags and Seat Belts.