Extended Wheel Base (VIN X)

Trim Hieght Specifications	Non-Cargo Van	D	5.47-6.25 Inch (in)
		J	9.21-10.00 Inch (in) (1) J Measurement taken 604 mm (24 inch) from the centerline of the FRONT wheel.
		K	10.07-10.86 Inch (in) (2) K Measurement taken 560 mm (22 inch) from the centerline of the REAR wheel.
		Z	2.28-3.07 Inch (in)
	Cargo Van (Z10) WITH Automatic Level Control (G67)	D	5.78-6.57 Inch (in)
		J	9.29-10.07 Inch (in) (1) J Measurement taken 604 mm (24 inch) from the centerline of the FRONT wheel.
		K	10.35-11.14 Inch (in) (2) K Measurement taken 560 mm (22 inch) from the centerline of the REAR wheel.
		Z	2.28-3.07 Inch (in)
	Cargo Van (Z10) WITHOUT Automatic Level Control (G67)	D	6.53-7.32 Inch (in)
		J	9.44-10.23 Inch (in) (1) J Measurement taken 604 mm (24 inch) from the centerline of the FRONT wheel.
		K	10.98-11.77 Inch (in) (2) K Measurement taken 560 mm (22 inch) from the centerline of the REAR wheel.
		Z	2.28-3.07 Inch (in)
Front	Camber	Service Allowed (Acceptable)	-1.20 to -0.20 Degrees (deg)
		Service Preferred (Target)	-0.70 Degrees (deg)
	Caster (Nominal - No Means of Adjustment Provided)	Service Allowed (Acceptable)	2.40 to 3.40 Degrees (deg)
		Service Preferred (Target)	2.90 Degrees (deg)
	Cross Camber	Service Allowed (Acceptable)	-0.75 to 0.75 Degrees (deg)
		Service Preferred (Target)	0 Degrees (deg)
	Cross Caster (Nominal - No Means of Adjustment Provided)	Service Allowed (Acceptable)	-0.75 to 0.75 Degrees (deg)
		Service Preferred (Target)	0 Degrees (deg)
	Total Toe	Service Allowed (Acceptable)	-0.20 to 0.20 Degrees (deg)
		Service Preferred (Target)	0 Degrees (deg)
Rear (Nominal - No Means of Adjustment Provided)	Camber	Service Allowed (Acceptable)	-0.75 to -1.25 Degrees (deg)
		Service Preferred (Target)	-1.0 Degrees (deg)
	Cross Camber	Service Allowed (Acceptable)	-0.50 to 0.50 Degrees (deg)
		Service Preferred (Target)	0 Degrees (deg)
	Total Toe	Service Allowed (Acceptable)	-0.30 to 0.30 Degrees (deg)
		Service Preferred (Target)	0 Degrees (deg)